What is The Standard Bedroom Door Size? – The Bedding Planet

What is The Standard Bedroom Door Size?


As an Amazon Associate we earn from qualifying purchases made on our website. If you make a purchase through links from this website, we may get a small share of the sale from Amazon and other similar affiliate programs.

One of the options for interior home remodeling is to create a new doorway to a bedroom. Or perhaps you wish to remodel or replace your old doors with new ones with a different design.

If either of these situations applies to you, you might be curious about the average bedroom door width. We have researched this subject and have a suitable solution for you.

Most interior doors, including bedroom doors, are usually 32 inches wide and 80 inches tall. If the entryway is one of the primary exits from the room, many building standards stipulate that this is the required standard. 

What is The Standard Size of a Bedroom Door?

There is no set size for the bedroom door. It relies on the building’s architectural style, the owner’s preference, or the frequently employed style in the relevant area.

The interior doors’ normal sizes, including those for bedrooms, are as follows:

  • 24 inches
  • 28 inches
  • 32 inches
  • 36 inches

Additionally, bedroom doors are typically 80 inches tall. It could sometimes be smaller or taller, like 79 inches or 81 inches (depending on the construction).

Continue reading as I examine internal doors and provide information that can assist you in selecting the appropriate bedroom door if the need arises.

How to Measure The Bedroom Door Size

It only takes a few measurements and some simple math to determine your door size. Use a measuring device to determine the door’s height and breadth.

Once you have precisely measured these, you may begin working on your home improvement project, such as replacing the door, installing a new kind of door, or embellishing the one you already have.

Step 1: Measure the width

Your door’s width should be measured from left to right, and you should note this figure. It’s crucial to measure the door alone. Don’t add any more components, such as weather-stripping.

It’s crucial to take measurements in multiple locations, especially for older doors, in case one isn’t quite rectangular. Use the highest figure if the sums differ. The standard door widths are 30 inches (76 cm), 32 inches (81 cm), and 36 inches (91 cm).

Step 2: Determine the height

Write down the measurement you obtained by running your measuring tape along the door from top to bottom. You might need to ask a buddy for assistance or use a chair. Once more, only the door itself should be measured; leave out any extra components, such as a door sweep.

Again, it is advisable to take many measurements on the door in case it is not a perfect rectangle. In particular, this is valid for older doors. Use the highest figure if the sums differ. The standard door height is 80 inches (200 cm).

Step 3: Figure out the thickness

Measure the thickness of your door edge using a tape measure. Measure this edge on the door frame, which is also referred to as the jamb. Although these figures ought to be quite similar, it can be useful to be aware of both. This should be  1.75 inches (4.4 cm).

Step 4: Measure the height and width of the framed door space

Measure the area where your door will go to be safe. The door frame space’s height and width should be noted. This will make it more likely that you will choose the ideal replacement door.

Take three measurements of the door’s width. Your measurement should be the least number. Right in the center of the door, gauge its height. Take measurements up the door from the floor to the top of the trim.

Rounding down is always preferable to rounding up when necessary. By doing this, you can be confident that your door will fit.

Factors to Consider When Choosing The Ideal Bedroom Door Size

There are things to think about whether you want to replace an old door or fix a new one to make the best decision.

Other things than changing your home’s windows or furniture can make the biggest difference. Doors continue to be essential. Everything will look fresh once you’ve found the correct door for your house.

Therefore, every homeowner needs to try to select the ideal door for their bedroom. The door in question also has to be functional. Additionally, it must coordinate with the design of your bedroom and any surrounding rooms.

Therefore, these are things to take into account while selecting a door for your bedroom.

1. Budget

You must first and foremost take into account the size of your budget before making final arrangements to buy a bedroom door or for any other component of your home.

Doors come in a range of costs and quality. Therefore, whether or not you buy a particular door depends on your budget.

So, after you know the size of your bedroom door, you may undertake extensive online research to determine door prices. Even door costs from your neighborhood vendor and those found online can be compared to see which is less expensive.

2. Operational styles

The operational styles need to be taken into account as well before selecting a door for your bedroom. Some doors swing on hinges or pivots, while others glide on tracks.

Why should you think about swinging doors then?

Due to their ease of installation compared to other door kinds, swinging doors are one option that many people are encouraged to think about. Such doors also provide a more comprehensive selection.

When is a sliding door the best option?

The pocket or sliding door should be the first option for a tiny space. In other words, the sliding door will be a smart choice if there is not enough room in your home for the door to swing open without creating an impediment.

This is because anytime you open the sliding door, it might simply slide into the wall or behind it. Unlike other door styles, it won’t create any obstructions or take up a lot of room.

But you might want to think about several aspects of sliding doors. They are disadvantages to this kind of door. The point is that sliding doors are less varied than other door kinds and are also more difficult to install.

3. The direction the door will swing

Typically, you would desire a door that, once opened, would rest in a handy location or direction and anticipate that nothing would hinder its motion.

However, you must take into account the arrangement of your furniture or windows while selecting or installing your bedroom door. When opened, will the door block the window?

Or will it be difficult to fully open the door after it is installed, taking into account the size of your room and the placement of your furniture?

So here’s the deal: A left-hand door will be your best alternative if you want your door to swing into the room when it is opened as well as on the left side. However, you require a right-hand door if the door enters the room from the right direction.

4. Door material

Bedroom doors can be made of wood, fiberglass, or steel. These are the ones that you will discover on the market. Consider this before spending a lot of money on your bedroom door.

But if you do your research and look at the homes in your neighborhood, you’ll discover that wood is probably the most common material for bedroom doors in many houses.

However, compared to other types, wooden bedroom doors appear to be more cost-effective. However, the disadvantage is that they frequently live shorter lives. But keep in mind that there are many qualities of wooden doors. Additionally, some are more costly than others.

The wooden door with a hollow core is less expensive than one with a solid core. So keep that in mind before you splash the cash. The solid-core wooden door’s interesting feature is that it stops sound from entering the space.

Many people like to have a solid-core wooden door in their bedroom since it feels a little heavier than the other options.

5. The finish of the bedroom door

Wooden doors come in a variety of wood veneers and other finishes. When it comes to completion, there are frequently countless options.

Additionally, they could be stained or painted. Therefore, you can make your decision depending on the wooden door you believe best complements your home’s décor and design.

Here are some fantastic concepts;

Choose a veneer that has a desirable grain pattern and natural hue. Additionally, you have a stain preference.

What about steel and fiberglass doors? You can choose from a variety of color selections since these often come pre-finished.

What is The Minimum Width For a Bedroom Door?

One option for interior home remodeling is to relocate or create a new doorway to a bedroom. Or perhaps you wish to remodel or replace your old doors with new ones with a different design. If either of these situations applies to you, you might be curious about the average bedroom door width. We have done our homework on this subject and have a suitable response.

The majority of bedroom doors are currently 32 inches wide. If the entryway is one of the primary exits from the room, many building rules require this as the minimum.

What is The Standard Size of a Bathroom Door inside the Bedroom?

The same general size guidelines that apply to interior doors, in general, must be followed for bathroom doors. It should be 24 to 36 inches broad and at least 80 inches high. The door’s thickness and style should complement the door frame.

Popular Bedroom Door Styles and Their Common Sizes

1. Flush Doors

Classic hinged doors are the most common internal door styles in most homes. A hinged door known as a flush door has a plain, flat surface without any paneling or molding.

These are a practical and affordable alternative if you’re seeking inexpensive interior doors that blend in and may be used in any room and house. The standard size of a flush door ranges from 24-84 inches.

2. Panel Doors

In order to create visual interest, panel doors are often hinged doors that have been divided into vertical or horizontal panels.

Whether you want a conventional or modern style, shallow or deep routing can be used to produce a wide range of diverse patterns. You can add glass or mirrored panels for even more visual appeal and light flow.

These molded interior doors’ style and rail design aid in strengthening the wood against warping, swelling, and shrinkage. Panel doors measure 32 x 80 inches.

3. French Doors

French doors are often a pair of double doors with glass panes covering most of their height or from top to bottom. French doors, a popular option for achieving the Hamptons look, can be used to connect internal living spaces without obstructing light.

Full glass doors with a timber frame are an option, as well as doors with several smaller panes for a more traditional, continental look.

French doors come in various conventional widths, but most often, each door is between 30 and 72 inches wide. In most cases, French doors are sold in pairs.

4. Glass Doors

Along with timber, aluminum, or cost-effective composite doors, glass can be added to a variety of internal door types. They are perfect for maximizing the amount of light that flows across rooms and can be hinged, sliding, folded, or stacked.

You can select transparent, frosted, or ornamental alternatives depending on where your glass doors are located in the house and if you want to prioritize light, seclusion, or style.

Standard glass doors are 80 inches tall and range in width from 60 to 72 inches, depending on the available space. The majority of homes have door frames that are measured to a standard size to make replacing doors simple.

5. Double Doors

A pair of double doors can be a terrific way to give your house a more opulent look while maintaining an airy, open sensation when they are open.

Double doors open in the middle to provide access to a large entranceway. They can be sliding or hinged. You can open both doors simultaneously or fix one door while the other opens.

The conventional size for a double door is 72″ x 80″, which is twice as wide as a single front door while maintaining the same height.

Make careful to gauge the thickness of the door you currently have. Most exterior doors have a thickness of 1-3/4 inches.

6. Sliding Doors

A track is used to hang sliding doors so they can glide to one side and open. Typically, the doors sit flush against the wall and move, leaving the space open. Single or double internal sliding doors with a central opening can be found in this category.

Due to the fact that they don’t swing into the room while they are open, homeowners frequently choose sliding doors as a practical, space-saving option. However, they may also be a fashionable addition on their own.

On average, the two most popular sliding door widths are 60 inches and 72 inches and 80 inches tall.

7. Barn Doors

Installing sliding doors in the gorgeous barn door style is growing in favor among Australian homeowners.

These solid wood doors are built on exposed barn tracks and come in a variety of paneled patterns, from the conventional to the contemporary. They move easily along the wall to open and are available as single or double barn doors.

The majority of barn doors are between 36″ wide (on the smaller side) and 96″ tall (on the longer side). Typically, standard barn doors are 36″ X 84″ or 42″ X 80″ in size, with an extra lip that allows them to overlap most 36″ X 80″ door frames by about an inch.

Niklas Lampi

My name is Niklas and I'm the author and content operator at The Bedding Planet. I've always had a big interest in bedding and more specifically sleep. If I find something that makes me sleep better, whether that's a lifestyle change or a better bedding environment, I'm ready to share it with the world!

Recent Posts